Series CT Manual
6
HELPFUL HINTS
Proper reject flow . . .
It is important that the reject water flow from the wing valve at all times. This flow of reject
water removes the unwanted contaminants from the membrane. Restricting this flow allows
the impurities to build up on the membrane and the membrane will be damaged. Make sure
that this flow yields 1/2 glass or cup in 30 seconds (110-200 ml/30 seconds). This will protect
the membrane. To clean the reservoir, use baking soda and a soft cloth. To sanitize the water
reservoir let stand for 1 hour. Rinse thoroughly before using the unit.
OVERFLOW
It is important that the hose lay flat on the counter for the overflow system to work properly.
Do not use with water that is unsafe or of unknown quality without adequate disinfection
before or after the system. Systems certified for cyst reduction may be used on disinfected
waters that contain filterable cysts.
Model
CT-445
CT-445P
Pressure
50-90
10-90
pH Range
3-11
3-11
Temperature
40-100°F
40-100°F
Daily Production Rate
22.3GPD
43GPD
Recovery Rate
30.2%
35.4%
Storage Capacity
1.25 Gallon
1.25 Gallon
System Dimension (In.)
11x10x14.5
11x10.14.5
Shipping Weight (Lb.)
15
20
Recovery Rating means the percentage of the influent water to the membrane portion of the
system that is available to the user as reverse osmosis treated water when the system is
operated without a storage tank or when the storage tank is bypassed.
