9 Electrical Connection
9.1 Terminal
9.2 Connection steps
Pls do the connections safely and strictly according to the steps below
Step 1 :
Before connection . Pls put “ BATTERY” Switch to “ OFF” . Then , conect battery to
Controller’s “ Batttery ”Terminals with cuprum cable which more than 6mm² and less than 1 meter .
Although there is reverse connection protection ,But connecting battery reversely is forbidden !
Connection is finished ,Put “ BATTERY” Switch to “ ON”.
Step 2 : To prevent producing sparks while connecting, User are supposed to set wind, solar
“M-SW: OFF .
Step 3 : Connect wind turbine to controller
’s “ Wind Input ”terminals ,Make sure positive to positive ,
negative to negative .
Step 4: Connect solar panels to controller
’s “ Solar Input ” terminals .Make sure positive to positive,
negative to negative .
Step 5 : After connecting ,User can do what he wants to do in step 2 to set Wind , Solar
“ M-SW : ON” .
Or you can do the operations on PC through RS232 .
10 Menu Operation
10.1 Buttons
Buttons
Description
It is used to select menu item and confirm parameter setting
It is used for left and right page turning in the screen or increase/ decrease number
It is used for left and right page turning in the screen or increase/ decrease number
It is used as return/finish function
13
Menu
