background image

©Copyright Task Force Tips LLC  2002-2019 

LIX-518 January 23, 2019 Rev12

MANUAL:  EXTEND-A-GUN 

MODEL XG18

Telescoping Waterway for Deck Mounted Monitors

INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE

DANGER

Read instruction manual before use. Operation of this device without understanding the manual 
and receiving proper training is a misuse of this equipment. A person who has not read and 
understood all operating and safety instructions, is not qualifi ed to operate the Extend-A-Gun 
telescoping unit.

TASK FORCE TIPS LLC

MADE IN USA • TFT.com

3701 Innovation Way, Valparaiso, IN 46383-9327 USA

800-348-2686 • 219-462-6161 • Fax 219-464-7155

To make the Extend-A-Gun as versatile as 
possible three mounting bracket kits are offered.  
Each kit has a different upper bracket, the lower 
bracket is the same in all three.

SHOWN WITH TFT MASTER NOZZLE

AND CROSSFIRE DECK GUN

ALTERNATE:
1) MOUNTING PLATE, 9” SQ.
TFT PART XGB-23
2) SADDLE BRACKET
TFT PART XGB-33

3" NPT

XGB-13 TUBE/SADDLE

BRACKET SET

XGB-23 PLATE/SADDLE

BRACKET SET

XGB-33 SADDLE/SADDLE

BRACKET SET

** - OUTLETS SHOWN ARE
FOR MODELS XG18PL - XL & XG18-VL-XL
FOR MODELS WITH 3” MAKE NPT OUTLET, ADD 1”

Содержание Extend-A-Gun XG18













Отзывы: