Phone: 0330 999 0019
Email: [email protected]
www.firechiefglobal.com
Radio Linked Resettable Manual Call Point
1. Remove the screw from the front of the
manual call point and carefully remove the
call point from the base/back box.
2. Insert the batteries supplied observing
the polarity indicated – you will hear
a short series of beeps, followed by
three dual tones which indicates that
the system is now ready to operate.
3. With the manual call point near to the
MASTER site alarm, press and release the
PROG button on the back of the call point
unit.
SC400RF
PAIRING A SC400RF CALL POINT
4. A number will appear on the LED
display on the front of each unit and
you will hear a confirmation tone from
each. The number is the address of that
SLAVE unit.
5. The units are now paired. Further
SC400RF units can be added to the
system, up to a total of 10 including
the master unit.
6. Mount the call point base in the desired
location using suitable fixings and
replace the call point cover and screw.
