19
Figure 6.3 Entering user name and password.
IMPORTANT!
Note that the user name and password are case sensitive.
6.4 Setting PoE on ports
Power supply via PoE is configured with the use of jumpers (see Section 3.4.2).
All connections shall be performed with 230 VAC power off.
6.5 Activation of redundancy protocols
If you connect the switches into a ring, then you need to enable the RSTP
protocol. Otherwise, if there are alternative paths, your network will not be
functional. By default, RSTP is turned off.
7 Installation of the switch
7.1 Installation of the cabinet on the wall
The cabinet has four attachment points. Marking of the attachment points is
shown in Figure 7.1.
