TFA HiTrax Tip, Руководство пользователя

Страница: 8 / 120

6.1 Setting the Current Time Mode
To Set the Current Time Mode
To set the current time and date, and their display formats, press
and hold the [mode] button for about 2 seconds to select the setting
display (the second digits will start flashing).
The Setting Sequence
When the seconds digits start to flash, press the [mode] button to
move the flashing following the setting sequence of the adjacent
diagram or press the [start/stop] or [reset] button to reset the second
digits to zero.
If one of the settings (minute, hour, year, month, date) is flashing,
press the [start/stop] or [reset] button to scroll through the setting
(hold the button down to scroll the setting at a faster pace).
When the ‘
month-date ’ or ‘ date-month ’ digits is flashing, press the
[start/stop] or [reset] button to switch between month-date (‘ m ’ icon
appear) and date-month (‘ d ’ icon appear).
When the ‘ 12 ’ or ‘ 24 ’ icon is flashing, press the [start/stop] or [reset]
button to switch between ‘ 12 ’ (12 hour format) and ‘ 24 ’ (24 hour
format).
When the beep ‘
on ’ or ‘ oF ’ icon is flashing, press the [start/stop] or
[reset] button to switch between ‘ on ’ (key tone ON) and ‘ oF ’ (key
tone OFF).
When the designated setting appears, press and hold the [mode]
button for about 2 seconds to exit the setting sequence. The setting
display will change to Current Time Mode automatically if NO key-
stoke has been activated for about 1 minute.