27
26
Radio-controlled alarm clock
• During night-time, the atmospheric interference is usually
less severe and reception is possible in most cases. A sin-
gle daily reception is adequate to keep the accuracy devia-
tion under 1 second.
6. Operation
• The device will automatically quit the setting mode if no
button is pressed for 15 seconds.
• Press and hold the
+
or
–
button in setting mode for fast
mode.
6.1 Manual setting of the time zone and time
• Press and hold the
TIME SET
button in normal mode for
three seconds.
• The clock hands move to 12.00 o'clock (default = without
time zone correction). Press the
+
or
–
button to make the
time zone correction (+3/-3). The time zone correction is
needed for countries where the DCF signal can be received
but the time zone is different from the DCF time (e.g.
+1=one hour plus).
Radio-controlled alarm clock
Hands to
9
10
11
12
1
2
3
Time zone
-3
-2
-1
0
+1
+2
+3
• Confirm the setting with the
TIME SET
button.
• The hour hand flashes. Press the
+
or
–
button to set the
hours.
• Confirm with the
TIME SET
button. Set minutes and sec-
onds in the same way.
• Confirm the setting with the
TIME SET
button.
• The manually set time is overwritten once the DCF time
signal is successfully received.
6.2 Alarm time setting
• Press the
ALARM SET
button in normal mode to enter the
alarm mode.
• 7:00 (default) or the last adjusted alarm time appear on the
display. The alarm time hand pulsates.
TFA_No. 60.2556_Anleitung 26.09.2019 9:57 Uhr Seite 14
