– 22 –
– 23 –
23
22
TUNE
–
Radio-controlled alarm clock with radio
Important information on product safety!
• Do not expose the device to extreme temperatures, vibrations or shocks.
• Protect it from moisture.
5. Elements
A: Display (Fig. 1):
A 1:
Time
A 2:
AM/PM
A 3:
Alarm symbol
A 4:
DCF reception symbol
A 5:
Daylight Saving Time symbol
A 6:
Alarm mode
A 7:
Radio mode
A 8:
Snooze symbol
B: Buttons (Fig. 2):
B 1:
VOL–
button
B 2:
VOL+
button
B 3:
MODE
button
B 4:
DOWN
button
B 5:
SNOOZE
button
B 6:
UP
button
TUNE
–
Radio-controlled alarm clock with radio
C: Housing (Fig. 1+3):
C 1:
Battery compartment
C 2:
USB Port
C 3:
Power adaptor jack
C 4:
LIGHT
switch
C 5:
Speaker
6. Getting started
• Remove the protective film from the display.
• Connect the attached power adapter to the alarm clock. Insert the power adapter pin into the device jack and connect the
plug to a wall socket.
Important!
Make sure that your household voltage is no more than 240V! Otherwise your device
may be damaged.
• The device will alert you with a beep.
6.1 Insert the batteries
• The batteries will operate as a backup power source in case of power failure.
• Insert two new batteries AAA 1,5 V into the battery compartment. Make sure the polarity is correct.
• Close the battery compartment again.
6.2 Radio-controlled time reception
• The clock will now scan the DCF frequency signal and the DCF symbol will be flashing on the display.
TFA_No. 60.2546_anl_04_20 02.04.2020 15:01 Uhr Seite 12