21
20
Digital alarm clock with USB charging function
• Protect it from moisture.
• Do not apply excessive force when connecting a USB cable. The USB plug fits only one way into the USB port.
5. Elements
A: Display (Fig. 1):
A 1:
Time
A 2:
AM/PM
A 3:
Alarm symbol
A 4:
Alarm time
A 5:
Snooze symbol
A 6:
Indoor temperature
A 7:
Charging symbol port 1+2
B: Buttons (Fig. 1-3):
B 1:
SNOOZE/LIGHT
button / dial
B 2:
ALARM
button
B 3:
°C/°F
button
B 4:
12H/24H
button
B 5:
Volume control wheel
B 6:
SET/LOCK
switch
C: Housing (Fig. 1-4):
C 1:
USB Port 1
C 2:
USB Port 2
C 3:
Temperature sensor
C 4:
Speaker
C 5:
Power adapter jack
C 6:
Battery compartment
Digital alarm clock with USB charging function
6. Getting started
• Remove the protective film from the display.
• Insert the power adapter pin into the device jack and connect the plug to a wall socket.
Important!
Make sure that your
household voltage is no more than 240V! Otherwise your device may be damaged.
• 00:00 and the indoor temperature appear on the display.
6.1 Insert the batteries
• The batteries will operate as a backup power source in case of power failure.
• For a permanent backlight, to use the charging function and to conserve battery power, use the supplied power adapter.
• Open the battery compartment at the bottom of the device.
• Insert three new AAA 1,5 V batteries into the battery compartment. Make sure the polarity is correct.
• Close the battery compartment again.
7. Operation
7.1 Backlight
•
Attention:
Continuous illuminated backlight only works when using the power adapter.
• Press the
SNOOZE/LIGHT
dial and you can select between four levels of brightness.
• To temporarily activate the backlight, press any button (in battery operation only).
TFA_No. 60.2017_anl_02_17 15.02.2017 16:33 Uhr Seite 11