TFA 30.5054.01, Инструкция по эксплуатации

Страница: 11 / 32

20 21
Operation
Special features of the display
y
Due to the special “E-paper” display, all display changes have a reaction
time of 1 second. The time interval between each keypress must be greater
than 1 second.
y
To ensure display quality, the screen automatically switches between positive
and negative display mode once every hour.
Manual settings
y
Press and hold the SET button (Fig.2-A) for 3 seconds to enter the
setting mode.
y
The first adjustable value appears on the display.
y
Use the + or - button (Fig.2-H+G) to make the desired setting. Press and
hold the + or - button in the respective setting mode for quick setting
(in steps of 2).
y Confirm with the SET button and go to the next setting.
y
The device will automatically quit the setting mode if no button is pressed
for 30 seconds.
y The sequence is shown as follows:
y
24/12-hour format (default: 24H)
y Year, month, day
y
Month/day sequence D/M or M/D (default D/M)
y
Hours, minutes
y Day-of-week language (default: GE)
y Day-of-week language: German (GE), French (FR), Spanish (SP), Italian
(IT), Dutch (DU), Danish (DA), English (EN).
Indication of maximum and minimum values
y Press the + button (Fig.2-H) in normal mode.
y MAX appears on the display. The maximum values measured since the last
reset appear on the display.
y Press the + button again.
y
MIN appears on the display. The minimum values measured since the last
reset appear on the display.
y To go back to the present value display, press the + button once more.
y
The device will automatically quit the MAX/MIN mode if no button is
pressed for 10 seconds.
y
To clear the recorded maximum or minimum readings, press and hold the +
button (Fig.2-H) for three seconds while the maximum or minimum values
are displayed.
Display indications
y
With the SET button (Fig.2-A) you can toggle between date and weekday in
normal mode.
y
Press the - button (Fig.2-G) in normal mode to change between °C (Celsius)
or °F (Fahrenheit) as temperature units.
y
In normal mode, press and hold the - button to switch between positive and
negative display mode.