29
must be received and stored by the temperature station in the first minute of
power being supplied to it.
SETTING UP:
Note: This temperature station receives only one outdoor transmitter.
1.
First, insert the batteries into the outdoor transmitter (see “
Install and
replace batteries in the outdoor transmitter
“).
2.
Immediately after and within 1 minute, insert the batteries into
temperature station (see “I
nstall and replace batteries in the
temperature station
”). Once the batteries are in place, all segments of
the LCD will light up briefly. Then the indoor temperature will be display.
If this is not displayed after 60 seconds, remove the batteries and wait
for at least 10 seconds before reinserting them.
3.
After inserting the batteries into the outdoor transmitter, the temperature
station will start receiving data from the outdoor transmitter. The signal
reception icon flashes.
4.
To toggle the display to the outdoor temperature press the IN/OUT
button. The outdoor temperature and the signal reception icon should
then be displayed on the temperature station. If this does not happen
