36
DATE SETTING :
Year (flashing) Date (flashing) Month (flashing) Weekday (flashing) Date (flashing)
The date default of the Temperature Station is 1.1. or WE 1. in the year 2003. Once the radio-controlled time
signals are received, the date is automatically updated. If the signals are not received, you can adjust the
date manually. To do this:
1.
Press the SET key after completing the time zone setting in order to enter the year setting (flashing).
Reset the year by pressing the IN key. The range runs from 2000 to 2029.
2.
Press the SET key again to enter the month and date display (flashing).
3.
Using the OUT key, set the month required. Using the IN key, set the date required.
4.
Press the SET key again to enter the weekday display (flashing).
5.
Using the IN key, set the weekday required.
6.
Press the SET key once more to confirm all settings or do not touch any buttons for around 30
seconds. The mode will return to normal.
ALARM SETTING:
1.
Press and hold down the AL1 key for around 2 seconds until the alarm time display flashes.
