Part# USB-SERFT
6’ USB TO SERIAL CABLE
Serial Operation
The TTS-04-NK supports RS-232 serial
operation via an optional USB to Serial cable
p/n USB-SERFT
Standard TTY or Terminal mode support
common commands available from direct
keyboard entry. Speech is generated on
reception of a <CR> termination character
ASCII 13 ( 0x0D)
Default Specifications:
Configuration: DTE Device
Default Rate 9600,8,n,1
Reception buffer 64 bytes
Hardware Flow RTS/CTS
Supported Pins Rx, Tx, RTS, CTS, GND
Setup - Changing voice, language, rate and volume
The TS-04 is capable of supporting 2 voice styles as well as English and
Spanish languages. Selecting these may be made by entering a special
“Setup Mode”.
Pressing the ‘CTRL’ and “S” key enables “Setup Mode”
Press “E
” to alternate language between English and Spanish.
Press “V”
to alternate voices between Female and Male.
Press “F”
to restore all original factory volume and voice settings.
Press “S
” to save settings. This stores the current voice and language
setting in memory. The current selection of volume and speech rate will also
be saved and used as the new power up default setting.
i
CTRL
S
E
V
F
S
7
