Textron PT-3500, Руководство оператора

Страница: 23 / 136

Revolution Series PT-3500 / PT-7500 Puller Tensioner Page 21
Operation
Operator Controls
**For control locations see Operator Control Panel Section on page 20.
Master Power Key Switch
This switch is used to control
power
to the operator
controls. This switch must be
turned to the On position to
start the machine.
Emergency Stop Button
When pushed, this red
push button stops all
operation
functions,
turning off system and
engine
power, while
disengaging all controls.
After being depressed, the
button must be rotated and released to the
disengaged position to restore power to the
system and reengage operator controls.
Hydraulic Engine Power Switch
To start the engine, first ensure that
the master power key switch is
turned to the on position, then push
the hydraulic engine power switch
upward to the [START] position. If
the glow plugs are required they
will engage automatically when the
switch is placed in the ON position.
Exterior Work Lighting Power Switch
This control switch, located
on the door panel, operates in
a rocking pattern, and is
designed to turn on and off
the exterior work lights,
thereby allowing operations
during low light conditions. To turn on the
exterior work lights, depress the switch
forward,
chair. To turn off the exterior work lights,
depress the switch backward toward the
ir. When the switch is engaged;
the light in the center of the switch will
illuminate.
Automatic Levelwind Controls
This switch and knob, located on the door
panel, are used to
control
the
automatic
levelwind
function. The
switch is pushed
up to turn on the
automatic
levelwind
function and back to turn off. Then knob is
used to increase and decrease the overall
speed of the levelwind.
For more
information see the Automatic Levelwind
Controls section.