Textron LF-128, Инструкция по безопасности и эксплуатации

Страница: 11 / 20

CONTROLS 3
11
When an alert occurs follow the general guidelines listed in
the chart below, and any specific actions outlined by the
grounds superintendent or service manager. This system monitors:
1.
Hydraulic fluid level
2. Engine oil pressure
3. Engine Coolant Temperature
4. Battery Voltage
Alert Action
1. Hydraulic fluid level - alarm
sounds and hydraulic fluid warning
light comes on. Hydraulic fluid is
below recommended level.
Stop tractor immediately, lower implements and shut off engine! Visually
inspect tractor for obvious signs of leaks around connections, hoses and
hydraulic components. Return tractor to service area for maintenance.
CAUTION: Hydraulic fluid is under pressure. Turn engine off and allow
fluid to cool before checking fluid level or adding oil to hydraulic tank.
2. Engine Oil Pressure - Oil
pressure light comes on. Oil
pressure low.
Stop tractor immediately, lower implements and shut off engine! Inspect oil
level in engine. If oil light remains on with oil at proper level, shut off engine and
tow or trailer tractor back to a service area. NEVER operate engine with oil light
on, severe damage to the engine can occur.
3. Engine Coolant Temperature
Temperature gauge indicating
engine coolant temperature above
230° F (110° C).
Stop tractor immediately, lower implements and shut off engine! Visually
check for leaking coolant. Remove debris such as leaves and grass clippings that
may be restricting air flow through rear screen on hood and area between
radiator and oil cooler. If engine continues to run hot, return tractor to a service
area.
CAUTION: Engine coolant is under pressure. Turn engine off and allow
fluid to cool before checking fluid level or adding coolant to radiator.
4. Battery Voltage - Gauge indicates
battery voltage below 10 volts.
Return tractor to a service area as soon as possible. Inspect battery and
battery charging system.
!
!