Textron Jacobsen Super LF 1880 Fairway Mower with ROPS, Инструкции по обслуживанию и ремонту

Страница: 171 / 300

CHASSIS
9C-5
SECTION 9C. FUEL TANK
GENERAL
The fuel tank is located to the left of the operator. A
mechanical fuel level indicator is built into the tank. The
fuel tank holds 12 U.S. gallons (45.4 liters). The tank is
a single piece molded plastic tank with a vented cap
(Figure 9C-1). The tank should require little service
other than cleaning unless punctured or otherwise
accidentally damaged.
The fuel tank should be drained when the machine is
stored for an extensive period of time. A drain valve
(Figure 9C-1) located on the bottom of the tank can be
used to drain fuel.
REMOVAL
1. Place a suitable container underneath the fuel
tank drain valve and open the drain valve. Loosen
the fuel cap slightly to aid in draining the fuel.
2. After draining, close the fuel cap and drain valve.
NOTE:
The fuel tank is mounted to the seat pan. The seat
and seat pan must be removed to remove the fuel
tank. The fuel tank and hydraulic tank are seated
on looped frame brackets for support.
3. Remove the seat pan mounting bolts, the fuel tank
mounting bolts, and the hydraulic tank mounting
bolts.
4. Tag and disconnect the seat interlock switch con-
nector located underneath the seat.
5. Carefully remove the seat and seat pan.
6. Tag and disconnect the fuel return hose and fuel
outlet hose. Immediately plug the hoses and tank
to prevent contamination of the fuel system.
7. Remove the tank from the frame.
INSTALLATION
1. Position the fuel tank on the frame brackets.
2. Using the tags created during removal, remove
the plugs and connect the fuel return hose and
outlet hose.
3. Carefully position the seat and seat pan for instal-
lation. Using tags created during disassembly,
insert the seat wiring harness through the seat
pan. Connect the seat interlock switch to the wir-
ing harness.
4. Secure the seat pan mounting bolts.
5. Secure the fuel tank and hydraulic tank with
mounting bolts.
6. Make sure the fuel drain is closed and fill the fuel
tank with fuel.
7. Inspect the filler cap for wear, damage or clogging
and replace if necessary.
8. Refer to Section 3 and the engine Manufacturer’s
Operation Manual for information on purging the
fuel system.
CAUTION
Diesel fuel is flammable. Do not drain fuel inside.
Heaters and static electricity can ignite floating fuel
vapors. Use extreme caution when draining fuel.
CAUTION
Dispose of unwanted fuel properly. Check with
the local environmental officials for information
on properly disposing of fuel products.
9C