Textron Greenlee CLM-1000, Руководство пользователя

Страница: 5 / 36

5
CLM-1000 • CLM-1000E
Using the Features
•
:
Press momentarily to turn the backlight ON. Once
lit, press button again to turn the backlight OFF. The
backlight automatically turns OFF after approximately
30 seconds to extend battery life.
• FT/M: Press momentarily to select length measurement
units. On the LCD, “ft” indicates feet and “m” indicates
meters.
• CAL: The meter must be calibrated each time it is
turned ON. Refer to “Operation” for a complete descrip-
tion of the calibration process.
• Esc: Press to escape from programming process.
• MEM: Button is used for the user-selected program-
ming function. Refer to “Operation” for a complete
description of the programming process.
• Cu/Al: Press momentarily to select cable material.
On the LCD, “Cu” indicates copper and “Al” indicates
aluminum.
• HOLD: Press momentarily to enter data hold mode.
When button is pressed, “dH” is present on the LCD and
the current value is captured. To exit this mode, press
the
HOLD
,
FT/M
or
Cu/Al
button. “dH” is no longer
present on the LCD.
• Auto Power Off (APO): When enabled, the meter will
automatically turn OFF after 10 minutes of inactiv-
ity. Inactivity is defined as no button press or rotary
switch movement. The buzzer sounds three times
approximately 30 seconds before the meter turns OFF
as a warning. To disable APO, press and hold the
HOLD
button while turning the meter ON.
• qp : Used during the user-selected programming
process. Refer to “Operation” for a complete description
of the programming process.
Programmable Switch Positions User’s Table
Use this table to keep track of the cable size that has been programmed into a switch position.
Make annotations with something erasable because switch positions can be reprogrammed.
Switch
Position
Gauge
Material Type
Size Type (circle)
1
mm
2
AWG kcmil aught Cu or Al
2 mm 2 AWG kcmil aught Cu or Al
3
mm 2 AWG kcmil aught Cu or Al
4 mm 2 AWG kcmil aught Cu or Al
5 mm 2 AWG kcmil aught Cu or Al
6 mm 2 AWG kcmil aught Cu or Al
7 mm 2 AWG kcmil aught Cu or Al
8
mm
2
AWG kcmil aught Cu or Al