Greenlee / A Textron Company
2
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
766 Cable Puller
Description
The 766 cable puller is designed for low force cable pulls
where the electric code allows wire rope to be pulled
through the conduit. Its small size and one piece design
promotes quick setups.
Operation
To properly position the 766 for pulling, set the round
nose of the frame over the end of the conduit so it rests
on 2 or 4 contact points as shown.
Inspect tool before using. Replace damaged, missing
or worn parts with genuine Greenlee replacement
parts.
Pinch points. To avoid injury, keep
hands away from bending shoe,
rollers and conduit being bent, when
operating this tool.
IMPORTANT SAFETY
INFORMATION
Read and understand all of the
instructions and safety information in
this manual before operating or
servicing this tool.
Failure to observe this warning could
result in severe injury or death.
This symbol is used to call your attention to hazards
or unsafe practices which could result in an injury
or property damage. The signal word, defined
below, indicates the severity of the hazard. The
message after the signal word provides information
for preventing or avoiding the hazard.
Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.
Hazards which, if not avoided, COULD result in
severe injury or death.
Immediate hazards which, if not avoided, WILL
result in severe injury or death.
SAFETY
ALERT
SYMBOL
The cable must always pass between the roller and the
frame.
