350019
4 - 1
rev 8/96
OPERATION
section 4
Operating Instructions
EN GINE
The Brouwer Turf Roller is equipped with a 5--1/2 HP
engine.
Complete details and operation instructions can be
found in the engine manufacturer's manual.
LO CA TION OF CON TROLS
The hydrostatic drive control is located on the left
side of the steering column.
The freewheel control crank is located on the front of
the hydrostatic air duct.
START ING THE EN GINE
For complete engine starting and stopping
procedures, see the engine manual.
Always start the engine with
the hydrostatic drive lever in
neutral. Failure to observe this precaution could
result in serious personal injury and/or machine
damage.
CON TROL OP ERA TIONS
Hydrostatic drive control:
This control governs the travel direction (forward or
reverse) and travel speed of your turf roller. (See
Drawing 1)
To move forward, move lever to the left from neutral.
The further the lever is moved, the faster the forward
travel speed.
To reverse, move the lever to the right from neutral.
The further the lever is moved, the faster the reverse
travel speed.
When the engine is running
and the control lever is in
neutral, the machine can roll if left unattended.
Personal injury or machine damage may result.
Always use a slow steady movement when moving
the control lever from neutral to forward or reverse
so that the machine will not leap forward or reverse
-- not only for the safety of the operator, but also to
prevent damage to the machine.
Abrupt movement of the hydrostatic control lever can
cause the rear roller to lift. Shift slowly to avoid
injury.
Drawing 1 - Forward - Reverse Control
Содержание BROUWER TR130
