Texmate, Inc. Tel. (760) 598-9899 • www.texmate.com
UM-35-SG manual (UM09)
Page 1
General Features
Specifications
Typical Application Connections
IS05
: Pressure/Load Cell
2
/20mV/V, 5/
10V
Exc 4-wire
+Exc
Input Lo
_Exc
Input Hi
PRESSURE TRANSDUCER
Input Configuration:
��������Differential
Full Scale Ranges:
����������Accepts inputs from 2mV/V or 20mV/V
trans duc ers
Excitation �������������������������
5V or 10V DC� Ratiometrically
compensated to operate with all transducer
output ranges�
A/D Converter:
�����������������12 Bit Dual Slope
Accuracy:
�������������������������±(0�05% of r 2 counts)
Temperature Coefficient:
100 ppm/°C (Typical)
Warm Up Time:
����������������2 minutes to specified accuracy
Conversion Rate:
�������������3 conversions per second (Typical)
Display:
�����������������������������3 1/2 digit 0�56" Red LED display (std),
Green or Super Bright Red are optional�
Range 0 to 1999 counts�
Decimal Selection:
����������
Header under face plate, X•X•X•X•
Over-range Indication:
����1 (MSD) displayed all other digits blank
Power Supply (std):
���������120/240V AC, 50/60/400 Hz� approx 1�5W�
(Optn) VO-DC/ISO ����������Isolated Switcher� 9 to 36V DC/12 to 24V AC
Operating Temperature:
��–10 to 50 °C
Storage Temperature:
�����–20 to 70 °C�
Relative Humidity:
�����������95% (non-condensing)
Case Dimensions:
�����������Bezel 3�78”Wx1�89”H (96mm x 48mm)
Depth behind bezel 3�36" (83�5mm) Plus
0�5 to �9” (12�7 to 22�8mm) depending on
connector used�
Weight:
�����������������������������NW� 12oz (0�34kg)
15�6oz (0�44kg)� when packed�
UM-35-SG
Pressure or Load Cell Meter
3 1/2 DIGIT with 0.56” LEDs
in a NEMA type 1 Style Case
An cost-effective meter to measure 4 wire pressure
transducers, strain gauges and load cells. .
The UM-35-SG has two header selectable trans duc er output
ranges of 2mV/V and 20mV/V� Both ranges can provide a full
scale display of 2000 counts from the precision ratiometrically
compensated 5V or 10V DC excitation provided by the meter�
The meter accepts 4 Wire, and like all UM-Series meters, is
easily scaled to display in en gi neer ing units such as psi, bar,
kbar, kpa, feet, lbs, and tons�
UM-Series
Optional super
bright LEDs
UM-Series utility meters for switchboard and process indication
UM-35-ACA
....AC amps, Scaled or True RMS, (
1 or 5 Amp
internal shunt), 3.5 digit.
UM-35-ACV
......AC volts, Scaled or True RMS.
199.9V AC
/700V AC header selectable ranges,
3.5 digit.
UM-35-DCA
....DC mV ±20mV/
±50mV
/
±100mV/
±200mV header selectable ranges, 3.5 digit
UM-35-DCV
.....DC Volts
±2V
/±20V/±200V DC header selectable ranges, 3.5 digit.
UM-40-ACA
....AC amps, Scaled or True RMS, (
1 or 5 Amp
internal shunt), 4.0 digit.
UM-40-ACV
....AC volts, Scaled or True RMS.
199.9V AC
/700V AC header selectable ranges,
4.0 digit.
UM-45-DCA
.....DC mV ±20mV/
±50mV
/
±100mV/
±200mV header selectable ranges, 4.5 digit
UM-45-DCV
....DC Volts
±2V
/±20V/±200V DC Header selectable ranges, 4.5 digit.
UM-35-CL
.......Process 4 to 20mA
(100.0)
, easily user scalable in engineering units from
–1999 to +1999. 3.5 digit
UM-35-HZ
.......
15Hz
to
199.9Hz
or optional 40Hz to 400Hz up to 500V AC , 3.5 digit.
UM-35-Pressure
..Pressure, strain gage and load cell, 4 and 6 wire, 5V DC excitation,
Header Selectable Sensitivity 2mV/V, 5mV/V, 10mV/V,
20mV/V
, 3.5 digit
UM-35-JF
........
J
thermocouple input, 1° resolution, order
°C
or
°F
, 3.5 digit
UM-35-KF
.......
K
thermocouple input, 1° resolution, order
°C
or
°F
, 3.5 digit
UM-35-RTD/F
..100Ω platinum RTD, 3 or 4 wire, order
°C
or
°F
and
0.1°
or
1°
, 3.5 digit
UM-45-CL
.......Process 4 to 20mA
(100.0)
, easily user scalable in engineering units from
–19999 to +19999. 4.5 digit
Low Range Adjustment : 0-1000 counts
Hi Range Adjustment : 1001-1999 counts
