Texmate, Inc. Tel. (760) 598-9899 • www.texmate.com
Page 1
DX-35_UL DS (DX1_UL)
LYNX
LYNX FAMILY
•
Pre-calibrated
I-Series
Input Signal Conditioning
modules, that have span or zero potentiometers, can be
interchanged between any
I-Series
compatible meter,
without recalibration, because all of the analog scaling and
reference circuitry is self-contained within the module.
•
24 V DC excitation is available to power external
transmitters and 5 or 10 V DC excitation is available for
strain-gages, load cells and resistance bridge type sensors.
•
AC/DC Auto-sensing power supply. For voltages between
85-265 V AC / 95-300 V DC (PS1)
or 15-48 V AC / 10-72 V DC (PS2).
•
Standard red or optional green or super bright red 3 1/2-digit
0.56” LED with display range –1999 to 1999 (4000 counts).
• Red or green 0.8" LED large display option.
• Display brightness may be externally controlled.
• 1/8 DIN (96 x 48mm ) case easily mounts in thin or thick
panels (up to 2’). May be ordered with optional extra fire
resistant metal case.
• Optional NEMA-4X, IP-65 hinged, lockable, water and dust
proof cover.
•
UL Listed
A versatile digital panel meter with standard or large
display, for monitoring and measurement applications.
DX-35
Lynx Panel Meter
3 1/2 DIGIT 0.56” or 0.8” LED
in a 1/8 DIN Case
General Features
Specifications
Input Module Compatibility
Input Specs
: ..............Depends on input signal conditioner
A/D Converter
: ..........12 bit dual slope
Accuracy
: ..................±(0.05% of r 2 counts)
Temp. Coeff
.: .............100 ppm/°C (Typical)
Warm up time
: ...........2 minutes
Conversion Rate
: ......3 conversions per second (Typical)
Display
: ......................
3 1/2 digit 0.56" Red LED display (std)
,
0.56” or 0.8” Green or Super Bright
Red (optn). Range –1999 to 1999 counts.
Polarity
: .....................Assumed positive. Displays – negative
Decimal Selection
: ....
Header under face plate, X•X•X•X
Positive Overrange
: ..
1 (MSD) is displayed with all other
digits blank.
Negative Overrange
:
1 (MSD) and – sign are displayed with
all other digits blank.
Power Supply
: ...........AC/DC Auto sensing wide range supply
PS1 (std)
................
85-265 VAC, 50-400Hz / 95-300 VDC @1.5W
PS2 .........................15-48 VAC,50-400Hz / 10-72 VDC @4.0W
Operating Temp
.: ......0 to 50 °C
Storage Temp
: ...........–20 °C to 70 °C.
Relative Humidity
: ....95% (non condensing)
Case Dimensions
: ....
1/8 DIN, Bezel: 96x48 mm (3.78"x1.89")
Depth behind bezel: 117 mm (4.61")
Plus 11.8 mm (0.47") for Right-angled
connector or plus 20 mm (0.79") for
Straight-thru connector.
Weight
: .......................
8 oz., 11 oz when packed.
Case Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Component Layout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Connector Pinouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Functional Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
I-Series Input Signal Conditioning Modules
. . . . . . . . . . . . 3-5
Input Module Calibration Procedures
. . . . . . . . . . . . . . . . . 6-7
Input Module Compatibility
. . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Input Module Component Glossary
. . . . . . . . . . . . . . . . . . . . 6
Installation Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Ordering Information
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Pin Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Index
✔
LYNX FAMILY
:
More than 33 different Plug-in
I-Series
Input Signal Conditioners are approved
for Texmate’s Lynx Family of meters. As shown on
pages 3 to 5.
See www.texmate.com for an up to date listing.
– AC Current
– AC Voltage
– DC Current
– DC Voltage
– Load Cell
– Pressure
– Process
– Prototype
– Resistance
– Strain-gage
–Temperature
– 4 to 20 mA
Large display option
0.8” red or green LED
• External transmitters or signal conditioners can be eliminated by
directly connecting the sensor to more than 33
I-Series
Plug-in
Input Signal Conditioners that include:
E469078
