7
2) POWER CORD CONNECTION
Some models have a connector retainer on the AC cord connector to hold the cord from
slipping off.
For safe operation, be sure the retainer is locked.
PD18-30AD, PD36-20AD are cannot connect with a commercial AC power inlet because
those current ratings are larger than same of the AC power source.
Process the attached unterminated cord shown below and connect it to an appropriate AC
power source.
In that case, wiring work must be done by either an electric engineer or a qualified person.
L
N
GND
1
BLACK WHITE
GREEN
2
BROWN
BLUE GREEN/YELLOW
＊
The color combination is ether item 1 or item 2.
1) OUTPUT CONNECTION
①
Make sure that the rear-panel output terminals and control terminals are connected
with jumpers as shown Fig. 2.
Output terminals of rear panel
Fig . 2
L
GND
N
－
－Ｓ
＋
＋Ｓ
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
Control terminals
Fig. 1
