TEXIO LSG SERIES, Инструкция по эксплуатации

Страница: 75 / 167

63
Operation 1.
Insert a USB drive into the USB port.
2.
Press Shift +
File
FUNC
.
3.
Select USB with the Media[F1] soft-key.
4.
Select the Data Type and choose the type of file
to recall.
Data Type: Memory Data, Setup Data,
Preset Data, NSeq, FSeq
5.
Select Recall File and choose a filename.

Turn the scroll wheel to increase/decrease the
file number.
Memory:
Setup Memory:
Preset:
NSeq:
FSeq: Model_file number.M
Model_file number.S
Model_file number.P
Model_file number.N
Model_file number.F
6.
Press Recall[F4] to recall.

Recall Ok will be displayed when the recall has
been completed.
File Utilities Press File Utility[F5] to access the file utility. See
page 63 for details.

Change the USB path.

Rename files or create directories.
Caution
If “Machine Type Error” is displayed it indicates
that the file that you are trying to recall originated
from a different model. You can only recall files
from the same model.
2-8-7. Recall Memory Safety Setting
Description By default when you try to recall a file or setting
from memory, a message will appear asking you
to press the Enter key to confirm. This is the
standard safety measure to ensure that the
wrong file/setting is not recalled. This safety
measure can be disabled by setting the Mem.
Recall setting to “Direct”.
Operation
1.
Press
Main
> Configure[F5] > Other[F2] and
set the Mem. Recall setting.
Range: Safety, Direct
2-8-8. File Utility
Description The file utility allows you to create new folders,
rename files and set the USB path directory.
It is only available for use with the USB external
memory.