TEXIO DL-2060, Инструкция по эксплуатации

Страница: 78 / 152

72
Figure 4-30
3.4.5 Scanning (Scan)
User can purchase an optional internal scanner card to be used with DL-2060 as the
following picture shown. This multipoint scanner card lets you switch and scan up to 10
(
or
20) channels of input signals. User can open and close individual channels, set scan count
and scan interval, store measurement readings and activate measuring through channels
defined with different measurement functions. The measurements are taken through all
defined channels in sequence. The scan count limits the total number of measurements
the multimeter makes through all defined channels in one single scanning operation. The
scan interval is the period of time the multimeter waits before it makes a measurement
through the first defined channel. The configuration made by user is stored in a volatile
memory and will be cleared after the meter is turned off.
SCANNER CARD
OUT A
OUT B is for 3 or 4 wired measurement.
SCANNER CARD
OUT B
※
Note: OUT-B is for 3-wired or 4-wired measurement. Please refer to the above picture for
more connection information. When you use 4-wired measurement with scanner card,