Texi Iris 10, Руководство пользователя

Страница: 27 / 34

Texi Iris 10 Operation Manual
27
Starting embroidery
Note:
Before starting embroidery always make sure that the chosen pattern corresponds with the selected size of the embroidery
frame, as well as the embroidering frame has been installed correctly.
To start the machine, press Start/Stop button in the right bottom corner of the machine.
Start/Stop button will turn green, and the machine starts em-
broidering the first colour.
1. After the first colour has been embroidered, embroidery ma-
chine automatically stops working and the thread is cut, the
needle bar automatically moves to the position which allows a
second colour embroidery.
2. Embroidering will be continued until the last colour of chosen
pattern has been embroidered and the machine automatically
stops.
Note:
After the pattern has been embroidered, the embroidery ma-
chine stop working automatically, shows red light, and produces
a sound signalling finished work.
Thread tension
Check the thread tension for each embroidery and, if not correctly adjusted, the needle track will not be flat or the cloth may be
wrinkled
.
Correct thread tension
From the reverse side of the cloth, the bobbin thread
should be about 1/3 of the needle track width.
As shown below, the thread tension is incorrect, and it is neces-
sary to regulate it.