Texi Catenaccio, Руководство по эксплуатации

Страница: 24 / 32

Texi Catenaccio – Operation manual 2019
(2)
Adjusting the wire-trimming safety sensor
(1) Rotate the lift motor shaft to turn the lift cam to the lowest point of contact with the lift roller,
this moment the screw is facing directly above, as shown in the figure a.
(2) Positioning reference plane of the trimming safety sensor chip horizontally upwards, and
placing the trimming safety sensor chip in the trimming safety sensor, as shown in the figure c, then
locking the screw to fix the trimming safety sensor.
(3) When the foot pedal is pressed for the first time, presser foot is pressed down, and the
trimming safety sensor chip does not enter the trimming safety sensor. When the foot pedal is
pressed for the second time, the machine starts to sew, and if there is an alarm that the machine is
trimming abnormality"E-018". Please loosen the screw and adjust the position of the trimming sensor
chip in the clockwise direction.
18