Premier Elite PSU200 & PSU200XP Installation Manual
INS314-3
6
Specifications
Power Supply Type
Type A
Mains supply
230V (+10%/-15%) @ 50Hz
Output voltage Range
13V-13.9V
Maximum Ripple Voltage
0.5V pk-pk
Maximum rating of Outputs
Aux 12V
Bell/Strobe
Network 1 & 2
Battery
DC+/DC-
1A
1A
1A
1.6A
0.9A
Output current (max)
2.5A
Maximum available current
1.5A (0.75A charge rate)
1.6A (2 x 0.3A charge rate)
1.9A (1 x 0.3A charge rate)
Rated output
See page 4.
Current consumption
PSU200 45mA
PSU200XP 75mA
Fuses
Mains = 3.15A slow blow; F1 = 1.6A
Battery Type
Maximum 18Ah; 1 x 7Ah; 2 x 7Ah; 1 x 17Ah
Maximum Recharge Time
24h @ 0.75A charge ate, 72h @0.3A charge rate
Battery charge current
0.3A or 0.75A (selectable)
Battery Low Voltage Signal
10.5V at supply output
Deep discharge cut-off
9V at supply output
Over Voltage Protection
16V
Operating temperature
-10
°
C to +55
°
C
Maximum humidity
95% non-condensing
Dimensions
310mm x 410mm x 100mm
Packed weight
PSU200 3.9Kg (approx)
PSU200XP 4.1Kg (approx)
Standards
2004/108/EC (CE directive): Hereby, Texecom declares that this device is in compliance with the
essential requirements and other relevant provisions of Directive 2004/108/EC.
Weee Directive: 2002/96/EC (WEEE directive): Products marked with this symbol cannot be disposed of
as unsorted municipal waste in the European Union. For proper recycling, return this product to your
local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection
points. For more information see: www.recyclethis.info.
RoHs Directive: 2002/95/EC RoHS Compliant. Hereby, Texecom declares that this device does not contain lead, mercury,
cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated depheny ethers (PBDE) in more than the
percentage specified by EU directive 2002/95/EC, except exemptions stated in EU directive 2002/95/EC annex.
This product is a Type B Moveable device and is suitable for use in systems designed to comply with EN 50131-1, EN50131-3,
EN50131-6 and PD6662 at Grade 3 and Environmental Class II.
Warranty
All Texecom products are designed for reliable, trouble-free operation. Quality is carefully monitored by extensive computerised testing.
As a result the
Premier Elite PSU200
and
PSU200XP
are covered by a two-year warranty against defects in material or workmanship. As
the
Premier Elite PSU200
and
PSU200XP
are not a complete alarm system but only a part thereof, Texecom cannot accept responsibility
or liability for any damages whatsoever based on a claim that the
Premier Elite PSU200
or
PSU200XP
failed to function correctly. Due to
our policy of continuous improvement Texecom reserve the right to change specification without prior notice.
Premier
& Premier Elite
are trademarks of Texecom Ltd.