User Guide
Touch Tone Remote Control
INS225-3
Menu [3] - Reset your Alarm System
1.
Establish a connection with you alarm system.
2.
From the touch-tone telephone enter your normal access code, if the code is
accepted you will hear a high-pitched beep.
3.
Press the
[3]
key on your telephone. You will hear a high-pitched beep and your
alarm system will be reset.
4.
Press the
[#]
key on your telephone to hang up or press
[*]
to return to the
start.
Menu [5] - Last Alarm
1.
Establish a connection with you alarm system.
2.
From the touch-tone telephone enter your normal access code, if the code is
accepted you will hear a high-pitched beep.
3.
Press the
[5]
key on your telephone. The system will play a number of high-
pitched beeps corresponding to the zone that last caused an alarm, e.g., if you
hear 4 high-pitched beeps, then zone 4 was the last zone to cause an alarm.
4.
Press the
[#]
key on your telephone to hang up or press
[*]
to return to the
start.
Menu [8] - Switch ‘PC Output 1’ On/Off
1.
Establish a connection with you alarm system.
2.
From the touch-tone telephone enter your normal access code, if the code is
accepted you will hear a high-pitched beep.
3.
Press the
[8]
key on your telephone. A high-pitched beep indicates that ‘PC
Output 1’ has been switched on. A low-pitched beep indicates that ‘PC Output 1’
has been switched off. Press the
[8]
key again to toggle the output on or off.
4.
Press the
[#]
key on your telephone to hang up or press
[*]
to return to the
start.
Menu [9] – Switch ‘PC Output 2’ On/Off
1.
Establish a connection with you alarm system.
2.
From the touch-tone telephone enter your normal access code, if the code is
accepted you will hear a high-pitched beep.
3.
Press the
[9]
key on your telephone. A high-pitched beep indicates that ‘PC
Output 2’ has been switched on. A low-pitched beep indicates that ‘PC Output 2’
has been switched off. Press the
[9]
key again to toggle the output on or off.
4.
Press the
[#]
key on your telephone to hang up or press
[*]
to return to the
start.