Texas Razor 5110 TR/W, Инструкция по эксплуатации

Страница: 12 / 15

12
bracket and into the lower handlebar.
4. Attach the upper handlebar on the lower.
handlebar fasten with wing nut from the inside of
the handlebar.
5. Customize cable and secure with cable clamps
(ID:P)
Mounting the engine brake cable: Illustration M3
1. Gently push the top bar (ID:B) forward
2. Insert the brake cable into the hole in the bracket
and lock (See arrow)
Mounting the self-propelled cable: Illustration M3
1. Gently push the lower bar (ID:A) downward
2. Insert the cable to power the hole in the bottom
bracket and lock (see arrow)
Mounting the recoil-starter: Illustration M4
1. Pull the engine brake bar and hold in order to
release the starter cord on the engine.
2. Pull starter cord from the engine
(Engine brake bar MUST be hold)
3. Attach the starter grip on the rack of handlebar.
4. Release the enginebrake bar and the starter grip.
Mounting the grass collector: Illustration M5
●
Click the frame to the grass collector as shown.
● The grass collector comes with a handy indicator
showing whether the box is full of grass and
needs emptying.
Rear discharge guard: Illustration M6
If you want to mow without grass collector. it is
important to attach the two spacer blocks. Insert the
2 blocks (ID:G) under the rear discharge guard.
Note: The spacer blocks is for rear ejection only!
otherwise they should be removed.
Warning: If the two blocks aren’t mounted. The
mower will have difficulties to dispose the grass.
Side discharge guard: Illustration M6
Lift the side guard and insert side discharge guard.
Then insert the mulching plug in rear discharger to
mow with side discharge function. NB Don’t use the
grass collector
Mulching plug: Illustration M6
Insert the mulching plug and remove side discharge
guard, if you want to mow with mulching functionality.
NB Don’t use the grass collector
Important: Remember to remove the mulching
plug, when using the grass collector.
Q
The engine must be completely cooled before
storing indoors.
Q
If the machine will not be used over a longer
period follow the instuctions under storage.
Q
Maintain or replace safety and warning labels
when necessary.
Installation and operating manual
Your lawnmower is manufactured according to
the latest safety requirements. These include a
blade brake that stops the motor and blade in 3
seconds when the blade brake. Every precaution
is only effective when it is followed exactly. Use
the following description when you mount your
lawnmower.
Identification of the parts
See Illustration ID
A. Bar for self-
propelled
B. Bar for engine brake
C. Throttle lever
D. Choke lever
E. Recoil starter
F. Wing nut
G. Rear discharge
guard
H. Height adjustment
I. Side discharge
guard
J. Water nozzle
K. Grass collector
L. Gasoline cap
M. Air Filter
N. Exhaust
O. Spark plug
P. Oil cap
Mounting
Unpacking: Illustration M1
Remove the mower from the box by pulling the
machine out. The box contains :
● 1 pcs mower
●
4 sets wing nuts (See ID; F)
Consisting of wing nuts, bolts and washers
● 2 pcs spacer blocks (See ID; G)
Warning:
Ensure that cables are not pinched.
Handlebar and height adjustment: Illustration M2
The handlebars are height adjustable. This means
that they can be adjusted so that it exactly fits your
workflow. Before you install the handlebar, it may be
a good idea to have decided which height is best for
you.
1. Set the lower handlebar tube to the working
height that suits you.
2. “H” is 105 cm high position and the “L” is 98,5 cm
low position.
3. Attach the wing nut from the inside of the side