Texas BVA 3000, Руководство пользователя

Страница: 6 / 12

6
GB - Table of content
Illustrations ...................................................................... 2
Warning symbols ............................................................. 3
Table of content .............................................................. 6
Identification of parts ....................................................... 6
Unpacking ....................................................................... 6
Operation ........................................................................ 6
Clogged blower ............................................................... 6
Storage ............................................................................ 7
Specifications .................................................................. 7
CE Certificate of conformity GB ..................................... 10
Read this manual carefully:
•
Make sure that you are familiar with the different
control settings and handles of the equipment.
•
The blower vac must only be used for the type of
work, which is described in this manual.
•
Only use original spare parts and accessories. If
original parts or accessories are not used, the liability
is no longer applied.
•
The operator is responsible for people’s safety.
Never use the machine near children or animals.
•
Minors may not use the blower vac.
•
The blower vac must only be operated by persons,
who are familiar with the safety of the machine.
•
The manual must follow the machine at all times.
•
If you feel unwell, tired or have consumed alcohol or
drugs, do not operate the machine.
•
Always ensure that all bolts are safely tightened,
before operating the machine.
•
The electrical parts of the blower vac must never get
in contact with water or moist.
•
Always use protective glasses during operation.
•
Never point the mouthpiece towards people or
animals, pebbles, dirt and debris may erroneously be
thrown out of when using the blow function.
•
Do not use the unit near flammable liquids.
•
The collector bag must be used in order to be able to
start the blower vac.
•
Spectators should at least be 5 meters away from the
working area.
•
Always turn off and disconnect the blower vac from
the power socket, when:
1. Switched from blow to vacuum mode and vice
versa
2. The extension cord is coiled or damaged
3. Left unattended.
•
Never use the blower vac to vacuum glowing
objects, like cigarettes or similar.
Waste electrical products must not be
disposed of with the household waste. This
tool should be taken to your local recycling
center for safe treatment.
Identification of parts
Se Illustrations, Fig 1.
1. Lock
2. Switch
3. Handle
4. Collector bag
5. Pipe
6. Wheel
7. On/off
8. Shoulder strap
Unpacking
Se Illustrations Fig. 2
The machine is almost completely assembled. It is
designed to take up least possible space when not in use.
Follow the instructions below:
1. Insert the upper blowpipe in the machine and fasten
the screw. Fig 2.1
2. Insert the lower blow pipe in the upper and fasten the
screws. Fig. 2.2
3. Mount the collector bag onto the machine. Fig.2.3
Operation
Illustration fig. 3
Use the blow function to gather and pile the material,
afterwards use the vacuum to collect the material.
1. Attach the collector bag hook Fig.3.2 onto the pipe
2. To shift between blow and vacuum mode, turn the
switch on the left side of the body of the machine.
When the switch is set as shown, the machine is in
blower mode Fig. 3.B, if opposite as vacuum Fig. 3.A
3. It is recommended to use the shoulder strap and
wheels under operation
4. The attached wheels make it easier to handle the
machine
Important:
Ensure that the collector bag is attached
properly, if not the blower vac won’t initiate.
Once the collector bag is full, the vacuum power drops
rapidly it is therefore crucial to empty the bag regularly.
Warning:
The machine is capable of throwing hard
objects, which can cause serious injury
Clogged blower
Wet materials such as leaves, grass etc. can easily clog
the pipe and blower. In such case, please do as follows:
1. Pull the power socket!
2. Take off the blower pipe from the housing.
3. Clean the blower with a soft brush. Fig.4