Texas Weather Instruments, Inc.
12
WR-25 Instruction Manual
Print Set
Pressing
select
and
average
at the same time puts the unit into print set mode.
The unit first displays the
report interval
in number of hours between lines of
printed information. Press the
maximum
and
minimum
keys to change
display.
Pressing
select
a second time displays the number of minutes between lines of
information. Press the
maximum
and
minimum
keys to change the display.
Press
select
a third time, and the minimum/maximum and form feed options 0
through 7 may be selected as illustrated in the table below:
SETTINGMIN/MAX FORM FEED
RAIN RATE
0
OFF
OFF
OFF
1
ON
OFF
OFF
2
OFF
OFF
OFF
3
ON
ON
OFF
4
OFF
OFF
ON
5
ON
OFF
ON
6
OFF
OFF
ON
7
ON
ON
ON
When rain rate is off, term rain is substituted.
Press
select
a fourth time to select the baud rate of the serial output. Press the
maximum
and
minimum
keys to change the display.
Press select a fifth time to select log interval hours. The log interval tells the
Weather Report
to send data to the internal memory and at what interval to do
so. Press the
maximum
or
minimum
to change the display.
Press select a sixth time to select the log interval minutes. Press the
maximum
or
minimum
to change the display.
Press
select
a seventh time and a number between 0 and 255 will appear in
the pressure/humidity window which represents
output
options. Enter the
proper option number by pressing the
maximum
or the
minimum
keys. The
output options control the selection of such things as AM PM, wind speed
knots, auxiliary display and average wind speed output
. (Look at the first item
