Texas Memory Systems RamSan-325 Скачать руководство пользователя страница 118

Страница: 118 / 121

RamSan-325/325c

User’s Manual

- 114 -

Name power-state-notif
Description The power state has changed
Includes

Message
Power State:

-1 notImplemented This indicates there may be an SNMP reporting

problem

0 noState

N/A

1 error

Voltage levels are dangerously low; the system

may be powered off.

2 warn

Voltage and/or current levels are below

specification.

3 good

Voltage and current levels are within specification.

4 warnHigh

Voltage and/or current levels are above

specification, or AC power has been lost.

5 errorHigh

Voltage and/or current levels are dangerously
high; the system may be powered off.

6 noDevice

N/A

7 notMonitored

Monitoring has been turned off to suppress
warnings.

Name memory-state-notif
Description The memory state has changed
Includes

Message
Memory State:

-1 notImplemented This indicates there may be an SNMP reporting

problem

0 noState

N/A

1 error

N/A

2 warn

N/A

3 good

The memory has been working properly since

system power on.

4 warnHigh

There have been one or more corrected ECC
errors since system power on.

5 errorHigh

There have been one or more uncorrected ECC

errors since system power on.

6 noDevice

N/A

7 notMonitored

Monitoring has been turned off to suppress
warnings.

Содержание RamSan-325


























































































































Результаты поиска

Содержание RamSan-325

Отзывы:

Texas Memory Systems RamSan-325, Руководство пользователя, Страница: 118 / 121

Результаты поиска

Содержание RamSan-325

Отзывы: