Warning
2
SWRU359E – September 2013 – Revised September 2015
Copyright © 2013–2015, Texas Instruments Incorporated
WL1835MODCOM8B WLAN MIMO and Bluetooth
®
Module EVM
17
Layer 4
.......................................................................................................................
18
Module Layout Guidelines (Top Layer)
..................................................................................
19
Module Layout Guidelines (Bottom Layer)
..............................................................................
20
Trace Design for the PCB Layout
........................................................................................
21
Layer 1 Combined With Layer 2
.........................................................................................
22
Top Layer – Antenna and RF Trace Routing Layout Guidelines
....................................................
23
Bottom Layer – Antenna and RF Trace Routing Layout Guidelines
................................................
24
MIMO Antenna Spacing
...................................................................................................
List of Tables
1
Approved Antenna Types and Maximum Gain Values
.................................................................
2
BOM
..........................................................................................................................
3
Module Layout Guidelines
................................................................................................
4
Antenna and RF Trace Routing Layout Guidelines
....................................................................
Trademarks
WiLink8 is a trademark of Texas Instruments.
Bluetooth
is a registered trademark of Bluetooth SIG, Inc.
Android is a trademark of Google Inc.
Linux is a registered trademark of Linux Foundation.
Wi-Fi is a registered trademark of Wi-Fi Alliance.
1
Warning
The WL1835MODCOM8B board is tested to comply with ETSI/R&TTE over temperatures from –20°C to
85°C.
This board should not be modified to operate in other frequency bands other than what they are designed
for.
FCC Licensing Requirements for the Wi-Fi and Bluetooth Radio Module of the EVM:
For evaluation only; not FCC approved for resale. This kit is designed to allow:
1. Product developers to evaluate electronic components, circuitry, or software associated with the kit to
determine whether to incorporate such items in a finished product
2. Software developers to write software applications for use with the end product. This kit is not a
finished product and when assembled may not be resold or otherwise marketed unless all required
FCC equipment authorizations are first obtained. Operation is subject to the condition that this product
not cause harmful interference to licensed radio stations and that this product accept harmful
interference. Unless the assembled kit is designed to operate under part 15, part 18, or part 95 of this
chapter, the operator of the kit must operate under the authority of an FCC license holder or must
secure an experimental authorization under part 5 of this chapter.
Per TI’s Regulatory Compliance Information located in the WL1835ModCOMB8B User’s Guide’s
“Evaluation Board/Kit/Module (EVM) Additional Terms,” this EVM cannot be used for production purposes
and is explicitly restricted from end-product introduction.
Use of this EVM requires the developer to provide a minimum distance of at least 20 cm from the antenna
to all persons in order to minimize risk of potential radiation hazards.
CAUTION
Do not leave the EVM powered when unattended.