Texas Instruments UCD3138A64CEVM-660, Руководство пользователя

Страница: 17 / 26

Composer Studio v5.5
Appendix A Summary of Using Code
In this appendix, the basic steps of using Code Composer Studio v5.5 to compile firmware for the
UCD3138 family of devices is described. A design flow is described but detailed steps for firmware code
creation, and firmware and hardware debugging are beyond the scope of this user’s guide.
A.1 Importing a CCSv5 Project
Upon running CCSv5.5 for the first time, the Workspace Launcher window appears as shown in
Figure 13 . The user decides whether or not to use a workspace, where it is located, or to check the box
that says Use this as the default and do not ask again . For this guide, a workspace is not used, so click
OK .
Figure 13. CCSv5.5 Workspace Launcher
17 SLUUB53 – July 2014 Summary of Using Code Composer Studio v5.5
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated