Texas Instruments UCC27423-Q1, Руководство пользователя

Страница: 12 / 19

EVM Setup and Operation
www.ti.com
12 SLVUB27 – March 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
UCC27423-4-5-Q1 EVM User’s Guide
Table 5. Recommended Operating Conditions
PARAMETER MIN MAX UNIT
VDD Supply voltage 4 15 V
INA Input voltage
–2 15
V
INB
ENA Enable voltage
0 15
V
ENB
T
J
Operating junction temperature –40 125 ℃
4.3 EVM Setup With FETs
4.3.1 Test Preparation
The UCC27423-4-5-Q1 EVM board has no installed FETs or peripheral components. To test the EVM with
FETs, the user must install the FETs themself.
Figure 13 shows the FETs and peripheral components to be installed inside the red outlines. For detailed
descriptions of each of the components, see Table 1 .
Figure 13. EVM installation With FETs