Texas Instruments UCC23313-Q1, Руководство пользователя, Страница: 12 / 25

UCC23511 Test Implementation
www.ti.com
12 SLUUBW3B – October 2018 – Revised June 2020
Submit Documentation Feedback
Copyright © 2018–2020, Texas Instruments Incorporated
UCC2351x Evaluation Module User’s Guide
Figure 7. Sink dv/dt Measurement
Peak sink current is calculated at 5.011 A for the UCC23513.
7 UCC23511 Test Implementation
Replace the UCC23513 with the UCC23511 from the default configuration on the EVM. Solder the
UCC23511 sample and use
Table 7 to adjust the value of R10 to observe the desired peak current out of
the driver.
Table 7. Minimum Gate Resistor (
Ω
)
Gate driver supply VCC-VEE (V)
Minimum total gate resistance (
Ω
) = (R
GON
+ R
G_int
) or (R
GOFF
+ R
G_int
)
15 4
23 7
30 10