Quick Start Procedure
5
SLAU706A – January 2017 – Revised September 2017
Copyright © 2017, Texas Instruments Incorporated
TSW40RF8x Evaluation Module
Figure 3. DAC Output Spectrum
4.2
ADC Output
Use the following to set ADC Output:
•
Launch
High-Speed Data Converter Pro
(HSDC Pro) version 4.2, or later
•
Load the ini file: ADC32RF80_LMF_8821.ini
–
Confirm
yes
to load firmware
•
Change to
Complex FFT
•
Change to
Channel 1/8
•
Toggle the ADC Output Setup icon
–
Click
Enable?
and
Remember for this session
–
Change the ADC Sampling rate to: 2949.12M
–
Change the ADC Input Frequency to: 1960M
–
Change NCO to: –1890M
–
Change Decimation to: 12
–
Press the
OK
button
•
Press the
Capture
button
•
Verify that LED D4 on TSW14J56 is blinking
•
Verify tone capture in HSDC Pro similar to
