DAC and ADC GUI Configuration File Changes When Using a Xilinx Development Platform
23
SLAU580B – June 2014 – Revised September 2016
Copyright © 2014–2016, Texas Instruments Incorporated
TSW14J10 FMC-USB Interposer Card
Figure 15. Updated LMK0828 Clock Outputs Tab
Open HSDC Pro GUI, select the ADC tab, and then select “ADC32RF45_LMF_82820” using the device
drop-down arrow. After the firmware is loaded, enter "32768" in the
Analysis Window (samples)
. Next
enter "2G" in the
ADC Output Data Rate
window. The GUI will display the new lane rate and JESD
reference clock required by the capture platform FPGA, as shown in
. Click the
OK
button.
Figure 16. HSDC Pro GUI
Click the
Capture
button. The captured results should look as shown in
.
