Installing the GUI
6
Installing the GUI
Install the GUI using the following steps:
1. Extract the
TS3A227E_GUI_Fimware.zip
contents to any destination folder.
2. Double click
setup.exe
located in the /TS3A227E_GUI_Firmware/TS3A227E_GUI folder that was
extracted in step 1.
3. The
Application Install - Security Warning window
pops up. Click the
Install
button.
Figure 12. Application Install - Security Warning Window
4. After the installation finishes, the GUI opens. The GUI is illustrated in
.
Figure 13. TS3A227E-EVM GUI Window
If the window shown in
appears, verify that the EVM is plugged into the PC.
11
SLVUAD9 – December 2014
TS3A227E EVM User's Guide
Copyright © 2014, Texas Instruments Incorporated
