Texas Instruments TRF3750 Series, Руководство пользователя

Страница: 12 / 40

Software Installation
2-2
2.1 Software Installation
All necessary software to operate the serial interface is provided on the
enclosed CD-ROM.
Version 1.0 of the TRF3750 software allows full control and programmability
of all the different functions and modes of the TRF3750. The software is
GUI-based and employs an intuitive graphical environment. You can load the
software in the following ways:
1) Insert the CD-ROM into the computer to be used to operate the serial inter-
face.
2) Double click the file called setup.exe.
The installer prompts you to select the directory in which you wish to install the
program. The installer automatically installs the TRF3750 software, the
National Instruments LabVIEW run-time engine, and the LabWindows
run-time engine in one seamless installation. After the computer goes through
the automatic installation, you will be prompted to restart your computer. The
software was created using LabVIEW, but it does not require LabVIEW to be
installed on the PC. This is why the run0time engines are installed.
Once you restart, the program is ready to function. Ensure that you have
connected your PC’s parallel port cable to the TRF3750 EVM (connector J5).
3) Once the installation is complete, the software is launched by running
C:\TRF3750.exe.
Once you launch the program, it automatically runs and gives you several
options (icons).
Figure 2−1 shows the structure of the main menu.