manualshive.com logo in svg

Texas Instruments TravelMate 3000, Руководство пользователя

Поделиться
Скачать
Texas Instruments TravelMate 3000 Скачать руководство пользователя страница 52

Handling the Battery Pack

Installing the Battery Pack

Install an internal NiCad battery pack as follows.  If the battery is new or not fully
charged, condition and/or charge the battery as described later in this chapter.

1.

Turn off the computer, disconnect the AC Adapter and any other
external devices, and carefully lay the computer upside down on a
padded surface.

2.

Insert the battery pack and integral cover into the computer's battery
compartment so that the two smaller tabs in the cover engage the
matching slots in the rear of the compartment.

3.

Lower the battery pack into the computer battery compartment so that
the cover is Hush with the bottom of the computer case.  Then slide the

locking latch toward the 

 (closed padlock) symbol.

4.

Turn the computer right side up and reconnect the AC Adapter and any
other external devices to the computer.

3-10 Getting Started

Содержание TravelMate 3000













































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды