Texas Instruments TPS92520EVM-133, Руководство пользователя

Страница: 29 / 57

5.3 Installation Error Recovery
If the screen shown in Figure 5-19 appears, use the following steps to install an unsigned driver one time.
1. Click Start and select Settings
2. Click Update and Security
3. Click Recovery
4. Click Restart Now under Advanced Startup
5. Click Troubleshoot
6. Select Advanced Options
7. Select Startup Settings
8. Click Restart
9. On the Startup Settings screen, press F7 during reboot to disable driver signature enforcement. The host
computer restarts.
10.Repeat the entire re-installation process
11.A message appears informing that installing .NET failed. Close that window and continue.
12.Double-click
Install unsigned drivers
After restarting a second time, the host computer resets. The reset requires all drivers to be digitally signed the
next time a default installation executes, unless these steps are repeated.
Figure 5-19. Setup Screen 19
www.ti.com Software
SLUUCC4 – OCTOBER 2020
Submit Document Feedback
TPS92520EVM-133 Dual 1.6-A Synchronous Buck LED Driver Evaluation
Module
29
Copyright © 2020 Texas Instruments Incorporated