Texas Instruments TPS7H500-SP Series, Руководство пользователя

Страница: 9 / 42

Table 3-2 describes and lists the connections and configuration for J6. Use J6 to switch between different DCL
connections to test different duty cycle limits. Pin 1 is noted by the dot next to the pin.
Table 3-2. J6 Connections and Configuration
Pin Connection Duty Cycle Limit Configuration Description
Pin 1 and Pin 2 100%
DCL is connected high to VLDO,
Used for TPS7H5001/2/3 EVM variants
Pin 2 and Pin 3 50%
DCL is connected low to AVSS,
Used for TPS7H5001/4 EVM variants
Floating 75%
DCL is left floating,
Used for TPS7H5001/2/3 EVM variants
www.ti.com EVM Connectors and Test Points
SLVUCD0 – FEBRUARY 2022
Submit Document Feedback
TPS7H500x-SP Evaluation Module User's Guide 9
Copyright © 2022 Texas Instruments Incorporated