Texas Instruments TPS7B8401EVM, Руководство пользователя

Страница: 3 / 14

www.ti.com
Introduction
3 SBVU060A – March 2020 – Revised April 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
TPS7B8401EVM Evaluation Module
1.2 Inputs/Outputs Connectors and Jumper Descriptions
1.2.1 J1 – OUT_S
Regulated output voltage sense.
1.2.2 J2 – OUT
Regulated output power supply voltage screw terminal.
1.2.3 J3 – IN
Input voltage banana connector.
1.2.4 J4 – IN_S
Input voltage sense.
1.2.5 J5 –IN_ST
Input supply voltage screw terminal. Twist together the positive input lead and ground return lead from the
input power supply, and keep them as short as possible to minimize input inductance.
1.2.6 J6 – EN
Output voltage enable. To enable the output voltage, connect the jumper to short VI to EN.
1.2.7 J7 – OUT
Regulated output voltage banana connector.
1.2.8 J8 – GND
Input supply ground return banana connector.
1.2.9 J9 – GND
Regulated output voltage return banana connector.
1.2.10 J10 – Setpoint Selection
Use the jumper to short the correct resistor to GND for the desired output voltage.
1.2.11 J11 – Test Hookup
Intended for test purposes only.
1.2.12 TP1 – IN
Input voltage test point.
1.2.13 TP2 – OUT
Regulated output voltage test point.
1.2.14 TP3 – GND
Ground test point.