AFE
E
x
p
a
n
s
i
o
n
Biasing &
Common Mode
I
N
P
U
T
S
ADS1282-SP
MSP430-FR5969
LaunchPad
ADS1282EVM-CVAL
PC Host
ADS1282-SP GUI
Header
SMA
SMA
ADS1282-SP EVM (ADS1282EVM-CVAL)
3
SBAU274 – July 2016
Copyright © 2016, Texas Instruments Incorporated
ADS1282-SP Evaluation Module (ADS1282EVM-CVAL)
1
ADS1282-SP EVM (ADS1282EVM-CVAL)
The ADS1282-SP EVM is ideal for evaluating the ADS1282-SP, a dual-channel, high-precision ADC.
shows an overview of the evaluation setup. The ADS1282-SP EVM is mated to the
MSP430FR5969 LaunchPad™ (must be purchased separately) which communicates on an SPI bus via
USB cable to the ADS1282-SP software GUI. The GUI allows for configuration of the ADS1282-SP device
and gives time domain and frequency domain analysis of captured data with the option to export captured
data to a file.
Figure 1. ADS1282-SP EVM with MSP430 LaunchPad
2
ADS1282-SP Software GUI Installation
Download the
ADS1282-SP Software GUI Installer
(
) from the product web page.
Unzip the installer, launch the executable, and follow all instructions. Refer to
for detailed
software installation instructions.
3
Flashing MSP430FR5969 LaunchPad with ADS1282-SP Firmware
The completion of the ADS1282-SP Software GUI installation in
results in the README file
shown in
. As stated in this file, data capture from the ADS1282-SP EVM to the MSP430 EVM is
not possible until the correct firmware is flashed into the MSP430 LaunchPad. Refer to the
MSP430FR5969 LaunchPad Firmware Flashing Guide for ADS1282-SP
) for full instructions.
This document is also provided in the GUI installation path as indicated in the README file, for your
convenience.