5.1.1.3 TPS65987S Jumper Configuration
To emulate a TPS65987S with the TPS65988EVM, the jumpers on J11 need to be adjusted. The TPS65987S
supports one Type-C port and contains one internal power path. When using the TPS65988EVM to emulate a
TPS65987S, the internal power path (PPHV1) is used as the Source Path and one of the external power paths is
used as the sink path. The TPS65988 can be configured to act as a TPS65987S through the use of a
TPS65987S Configuration Template in the TPS6598x Application Customization Tool. Refer to
and
for the TPS65987D Jumper Configuration. When the TPS65988EVM is configured as a TPS65987S,
only Port A is functional.
Figure 5-5. TPS65987S Jumper Configuration
Setup
SLVUB62B – JUNE 2017 – REVISED NOVEMBER 2020
TPS65988 Evaluation Module
9
Copyright © 2020 Texas Instruments Incorporated
