Texas Instruments TPS65916EVM, Руководство пользователя, Страница: 18 / 24

Write Register
(Deferred Mode)
Read Register
Immediate or
Deferred Mode
Bit
Fields
Setup and Operation
www.ti.com
18 SLIU021 – September 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
TPS65916 EVM User’s Guide
Figure 16. Low Level Configuration Page
3.3 Running a Script with the GUI
Use the script editor to automate a series of register writes, static bit writes, and delays.
• To launch the script window from the main GUI menu, select Script → Launch Window . The script
editor opens a blank window.
• To record a script, from the main GUI menu, select Script → Start Recording and then run the
commands from the main GUI. After each register write or read, the script editor records the command
that was run.
• When finished recording, select Script → Stop Recording .
• To save the script, on the script window menu select File → Save As... and then choose the destination
for the script file.
• To run the script again, press the F5 key or on the Script window menu, select Run → Run Module .
– If an attempt is made to run the script before being saved, a prompt displays for the user to save
the script.
– Otherwise, to save the script, select File → Save As... and then choose the destination for the script
file.
• The script in Figure 17 turns on SMPS1 to 1.15 V and then turns on SMPS3 to 1.25 V. These
commands can run a power up and power down sequence quickly, eliminating the need to manually
turn on all of the rails.