GUI Information
Figure 4. Register Map View
6.3.3
Modes
This section is used for executing multiple register writes in a single step. For example, to configure the
device in SLEEP state, multiple bits must be configured for SMPS and LDO supplies. An example is
provided in the .xml file that comes with the GUI package.
Users can create their own sequences in the .xml file.
6.3.4
I/O writes
Three control signals for the TPS65910 (SLEEP, PWRHOLD and GPIO) can be altered using the GUI. To
select these signals, the user can use the I/O Flag tab on the menu bar. For mapping of the I/O lines, refer
to the TPS65910 schematic and datasheet for the GPIO-to-USB adapter at
http://focus.ti.com/docs/toolsw/folders/print/usb-to-gpio.html.
11
SWCU065E
–
March 2010
–
Revised May 2011
Introduction
Copyright
©
2010
–
2011, Texas Instruments Incorporated
