Texas Instruments TPS65084x EVM, Руководство пользователя, Страница: 5 / 12

+
±
VSYS
(5.4V
t
21V)
- BUCK5 Load +
- BUCK5 Sense +
www.ti.com
Setup
5 SLVUAH0A – November 2015 – Revised July 2017
Submit Documentation Feedback
Copyright © 2015–2017, Texas Instruments Incorporated
TPS65084x Evaluation Module
7 Setup
The typical sequence for the switches is CTL1 (PMICEN), CTL5 (SLP_S4B), CTL4 (SLP_S3B) with CTL3
(SLP_S0IXB) already enabled to move through the sequence. From there, the CTL3 (SLP_S0IXB) pin can
be toggled to test Connected Standby.
Figure 1 is an example setup for using the TPS65084x EVM:
Figure 1. TPS65084x EVM Setup
8 Software
8.1 Software Installation Instruction
A GUI is supplied to provide a simple way to communicate to the device via I
2
C. The GUI can be
downloaded from:
http://www.ti.com/tool/IPG-UI
Additional installers are needed to update the GUI to contain the register map for this device. They can be
downloaded from:
https://ti.com/licreg/docs/swlicexportcontrol.tsp?form_id=184041&prod_no=TPS65084X_94X&ref_url=hval
_ipg
Information on the installation of the IPG-UI can be found in the IPG-UI User's Guide ( SLVUAH9 )