Caution: Bright WLEDS
www.ti.com
Board Layout
Board layout is critical for all high-frequency, switch-mode power supplies.
through
show
the board layout for the TPS61165EVM-283 printed circuit board (PCB). The nodes with high-switching
frequencies and currents are kept as short as possible to minimize trace inductance. Careful attention was
given to the routing of high-frequency current loops and a single-point grounding scheme is used. See the
data sheet for specific layout guidelines.
Figure 4. Assembly Layer
7
SLVU224C – January 2008 – Revised February 2010
TPS61165EVM-283
Copyright © 2008–2010, Texas Instruments Incorporated
